CNC and PLC - Tpa Spa

Go to content

Main menu:

products

Compact 3                                                               

The Compact 3 is a small PLC terminal, which opens the way to the "basic line" of category PLC of Tpa, is +24VDC powered with serial interfaces and Windows CE 6.0 operating system, to be installed as the only operator interface. It is particularly suitable for small machines up to a maximum of 2 axes operated in point-to-point positioning. The PLC system takes advantage of the PC architecture for cyclical management of machine and for both the user interface functions through a touch-screen monitor 7” integrated with resolution 800 X 480 pixels.




Compact 4                                                                     
The Compact 4 is a CNC based on an industrial PC, small in size, likely to be installed in electrical cabinet with wall assembly. It is particularly appropriate for machines small in size, up to a maximum of 4 pulse train, digital or analogical axes. The PLC system uses the PC architecture both for the control functions of the motion and the cyclical functions of machine, and for the user interface functions by using a touch-screen monitor or a mouse and a keyboard. As an alternative to the touch, it can be connected to a supervisor PC. This product integrates 32 Inputs/Outputs, with the possibility to expand them if necessary. In addition to this, the product also includes 4 connectors to manage 4 pulse train axes.                                                                                                           


        PRODUCT DATASHEET PDF
Menu a tendina
Compact 6                                                                   

Compact 6 is the new PLC based on industrial PC, small in size is designed to be installed in an electric cabinet with DIN rail (omega rail) or wall mounting . It’s particularly suitable for small machines, up to 6 digital or analog axes. The PLC system uses the PC architecture either for the functions of motion control and machine cyclical, or for the user interface functions, through the use of a touch-screen monitor or a mouse and a keyboard. As an alternative to the touch, it can be connected to a supervisor PC.

                                                                          
        PRODUCT DATASHEET PDF
                                                               



Cn2008 SE
Cn2008 SE is an embedded computer, small in size, with a +24VDC supply that can be expanded with boards faced to the internal bus PC104 and equipped with Windows CE 6.0 operating system. Cn2008 SE operates in connection with a supervision PC Unit by means of a dedicated Ethernet network; you can place the CNC in an electrical cabinet, remoting the position of the dashboard that hosts the user interface, usually characterized by a commercial PC. The system Cn2008 SE is a numerical control suitable for medium size machines, roughly up to 16 axes and 16 remote I/O couplers. It is possible to connect several Cn2008 SE devices with the same supervisor PC unit; doing so can provide a modular control system particularly suitable for a line of machines or a large work centre. The system is able to provide different filedbuses, depending on the hardware and software configuration it’s possible to support: Greenbus, EtherCAT, Mechatrolink, Scan and Can.                                                                           



        PRODUCT DATASHEET PDF

Cn2128
Cn2128 is a high performance embedded computer, supplied with 110/230 Vac, with internal buses PCI-E/PCI and with operating system Windows CE 6.0. Cn2128 operates in connection with a supervision PC Unit by means of a dedicated Ethernet network; you can place the CNC in an electrical cabinet, remoting the position of the dashboard that hosts the user interface, usually characterized by a commercial PC. This system is particularly suitable for large machines, characterized by a large number of axes that require a high processing power to generate the paths through sophisticated calculation algorithms. The system is able to provide different filedbuses, depending on the hardware and software configuration it’s possible to support: Greenbus, EtherCAT, Powerlink, Mechatrolink, Scan and Can.


         PRODUCT DATASHEET PDF



 
Back to content | Back to main menu